The routine matters needing attention during the use of the automatic cutting machine between China and Thailand are as follows:

1. Please be sure to connect the ground wire, and connect the ground wire cable meeting various requirements to the ground wire terminal of the automatic cutting machine, otherwise there will be danger of electric shock.2. Please confirm the power consumption required for automatic cutting of the main body in advance, and the fluctuation of the power supply voltage should be limited within 5% of the rated voltage.3. The sharp fluctuation of power supply voltage may cause the automatic cutting machine to stop; When the power line has a large current load or electromagnetic induction due to solenoid, the automatic cutting machine may produce wrong action.4. Please note that the connected power cable should not interfere with the operator's operation in the future.5. Please confirm the power consumption required by the automatic cutting machine in advance.6. When installing the automatic cutting machine, please prepare the power distribution equipment. If a leakage protection circuit breaker is used, please choose a product with a rated sensitive power supply of more than 10mA.7. During power-on, non-professionals are not allowed to take off the cover of the electric cabinet at will, and do not take off the terminal parts, cables and other electrical parts.8. When touching the terminal box, please be sure to turn off the circuit breaker of the system; After work, please be sure to put on the terminal box cover that you took off at work.9. Do not set up, operate, maintain or perform routine inspection except the designated personnel; Otherwise, there is danger of electric shock and injury.10, wiring, check, please cut off the power supply; Otherwise, there is danger of electric shock and injury.11, don't use the cable is damaged, don't pull, backlog or other heavy objects on it; Otherwise, there is danger of electric shock, machine stalling and burning.12. During the operation of the automatic cutting machine, it is absolutely forbidden to touch the rotating and transmission parts of the motor. When the V-belt of the driving part needs to be removed due to inspection and maintenance, or when operating near the driving gear, please turn off the power switch first and confirm that the automatic cutting machine has stopped completely before working; Otherwise, you will be in danger of injury.13. Please don't put your hands or fingers into the safety baffle of the automatic cutting machine. Otherwise, the running gear or belt may pinch your hands or fingers and cause injury.14. When the automatic cutting machine is running or adjusting all parts while starting the automatic cutting machine, please never reach into the automatic cutting machine or lean out to look inside the automatic cutting machine, otherwise it may cause an accident.15. It is absolutely forbidden to modify the automatic cutting machine; Otherwise, there is danger of injury and equipment damage.16. In order to cut off the power supply in time, an emergency stop device has been set outside the automatic cutting machine; Please keep the emergency stop device running correctly and sensitively, otherwise there is danger of injury.17. After recovering from an instantaneous power failure, there may be a sudden start of operation. Please do not approach the automatic cutting machine; Otherwise, there is a danger of injury.18. Do not directly drive the motors through external power; Otherwise, fire may occur.19. Do not place combustible materials near the periphery of the automatic cutting machine; Otherwise, fire may occur.20. Do not turn on or off the power supply of the equipment frequently; Failure to do so may lead to failure.